Showing all 8 results

  • Hydraulic Grease Nipples , All Categories

    Metric Thread Grease Nipple

    • Standard: DIN 71412
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Sizes: As per below chart
    • Hardness:  Minimum 550 HV for nipple head
    • Thread: Parallel,  Taper
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated
  • Hydraulic Grease Nipples

    Two Face Grease Nipples

    • Standard: DIN 71412, SAE J-534
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Hardness:  Minimum 550 HV for nipple head
    • Thread: Parallel,  Taper
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated
  • Hydraulic Grease Nipples

    Hexagonal Grease Nipples

    • Standard: SAE-J 534, DIN 71412
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Sizes: As per table below
    • Hardness:  Minimum 550 HV for nipple head
    • Thread: Parallel,  Taper
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated
  • Hydraulic Grease Nipples

    NPT/PTF Thread Grease Nipples

    • Standard: DIN 71412
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Hardness:  Minimum 550 HV for nipple head
    • Thread: Taper
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated
  • Hydraulic Grease Nipples

    UNF/SAE J-534 Grease Nipples

    • Standard: SAE-J 534, DIN 71412
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Hardness:  Minimum 550 HV for nipple head
    • Thread: Parallel,  Taper
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated
  • Hydraulic Grease Nipples

    BSP Thread Grease Nipple

    • Standard: DIN 71412
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Hardness:  Minimum 550 HV for nipple head
    • Thread: Parallel (G) , Taper (R)
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated
  • Hydraulic Grease Nipples

    Pressure Relief Grease Fitting

    • Sizes: As per table below
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Thread: Parallel,  Taper
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated
  • Hydraulic Grease Nipples

    Protection Caps

    * They are used for protecting the lubricating point against contamination and are suitable for DIN 71412 conical head grease nipples.
    * They are available with or without straps in various colors.